Printful: Print on Demand , 6.076 avaliações

They used to be very fast sending the products from 1 to 3 days now they take a week to send the orders to any store that is respected absolutely this processing time is unacceptable, very satisfactory company change with SPOD more than 20 daily shipments the same day every day.

i cant connect the app with shopify account, my design are all gone.
I cant install it again, i need to use another app

This is the first time I am writing a negative review about an app, but this is truly ridiculous.
An order for a product went through and looked like it would be fulfilled normally. A full week later, the literal latest the product should have been shipped out, I get a notification that the item is out of stock and the order cannot be fulfilled. When contacting the support they said that I should send the customer a substitute product, WHICH IS NOT WHAT THEY ORDERED. They continued saying that I should remove the product as visible on my store WHICH THEY SHOULD HAVE WARNED BEFORE THE ORDER OCCURED. There is no way that Printful does not know that they are going to be out of stock of a product, yet they issue no warning and expect us to send customers products that they did not order. Printful's integration is extremely easy which is what makes the app attractive initially, but they clearly could not care less about their customers.

It does not give options for the mock ups as far as Caucasian, African american, and etc. Not all business' are targeted toward white people

Edit: Had to change to a 1 star review. This is by far the worst customer service I've ever experiences. Would absolutely not recommend using Printful for your business.

I was really excited to use this app for my online shop, but I've had some bad experiences with my test orders. The customer service can be a bit rude and it feels like they do not read your messages at all before sending a standard reply that does not answer your questions.
I'm afraid I'm gonna have to look for a different print on demand service.

UPDATE 2: Back to 1 star. I am very shocked with how the customer support handles problems.

UPDATE, bumping my 1 star to 2: The short of it is Printful might be totally fine for you if you just want to slap some designs on t-shirts and then sell them on Etsy without any regard for quality. But if you want to start a brand and are concerned about quality, this probably isn't for you. The main reasons for this are: poor customer support, a painful mockup editor experience, and a lack of variety in the t-shirt options (not enough heavy cotton a la streetwear, too many soft fitted tees that warp/stretch/don't last).

The editor in particular is rough. Using it is a painfully haphazard experience. For example, if you have different versions of the same design (i.e. the same design in white (for dark shirts) and the same design in black (for light shirts)), you have to manually re size and position them separately. The grid is useless for getting the placement identical between these two designs, so you wind up having to move things just a touch, save, check the mock up, then go back and adjust again if needed. Either that or you can settle for your customer clicking between product images and noticing that one design is slightly higher than the other. A small thing to notice, but it makes a world of difference in presenting your brand in a professional way. A good brand should have consistency and avoid simple mistakes like that. And then when it comes to resizing the image, you have to drag the corner of the design while watching the DPI go up or down. Thing is, it doesn't go up or down by 1 DPI at a time. If you have one design perfectly placed and sized at 377 DPI and now you're trying to match another design identically, the DPI will constantly jump between 373 and 378. Again, resulting in a difference that is super tiny, but makes a huge difference in your brand image and consistency across product variants. Other limitations of the editor include not being able to edit the design on the mockup that you will actually use. Let's say you want your mockups to be flat product shots. You'll still have to edit the shirt on a doofy looking model. This again results in too much work between editing and understanding how your final product will look. If you want to get artsy and do a black design on a black shirt, your mockup will be a plain black shirt--no design in sight. Even in other cases (not pure black ink on black fabric), large areas of black in a design will be replaced with the fabric of the shirt. The problem is, that's not how the actual product will look. The black will be printed (that's the beauty of DTG, no limitations on screens like screenprinting), but that means what your customer sees on the mockup vs what they will actually receive after purchase look totally different.

I'm hoping for improvements in the future. If I'm so frustrated, why do I continue to use it? Because it does the bare minimum for now. For now is the key there. Right now I'm using Printful as a foundation for building my brand with limited capital, but if my brand grows to a point where I can leave printful OR if competition springs up that can address these issues, I currently don't see many compelling reasons to continue using it.

I'm not sure why Printful is in charge of fulfillment for other apps (I tried to ignore, once the items were un-synced. It did not work). Why printful is syncing these items in the first place is a major cause for concern, simply because these producuts are not being handled or manufactured by printful to begin with. Once they are no longer in control of what happens on my shopify store, for items that weren't created on their platform to begin with, then I can give them another shot. Right now it's far too confusing and frustrating dealing with a company that simply says "that's just how our platform is set up".

Excited to see what they could do we hastily we placed several sample orders, for multiple garments with Printful (in hindsight this was a mistake).. EVERY garment had 1x or more of the issues details below: • Badly folded and creased after being squeezed into mailing bags that are WAY too small (so they look used/worn)
• Grubby / Dirty factory floor marks
• Misplaced prints (so printed at an "angle" even though all of the artwork was 100% straight)
• Poorly embroidered logos that are bunched. (not enough backing used)
• Pretreatment stains (yellow) on ALL DTG garments.
• Poor delivery times that missed the agreed SLA times. • It was initially claimed that you now have a "UK" based production centre (which is part of the reason we contracted you, but it appears all of these garments were sent from Europe?) To be frank the overall quality and experience is shockingly bad, and if these had been sent directly to our customers (luckily these were all "Test" orders shipped directly to us!) I am certain that they would have ALL been returned leaving our reputation for high quality products and service irrevocably damaged. We raised all of these issues with Printful, and approximately 20x emails later with multiple different reps (you never know who your going to get! another part of the problem: it's basically just a call centre full of people that couldn't care less!!) the general "gist" of their responses we're that it's: "Within Parameters" These people are literally trained to dismiss your issues, and point to some BS "Parameters" that make no sense, and they basically repeat themselves with their fingers in their ears... Not once did they EVER accept responsibility... It truly was a shockingly bad experience. Shockingly bad products, shocking customer services, and shocking inability to accept the fact that screwed up, filthy dirty garments, covered in stains, with wonky prints, and badly embroidered logos are not within anyones "Parameters". Please don't risk it, its not worth it, even if by chance you get a good order once, you'll rue the day when you have a problem... they won't be interested.

I have been using print sources such as this since 2006, I started with cafepress. I have NEVER had worse customer service. When garment was recieved what should have been gray was actually purple. I contacted them right away, 8 days later it comes down to being told that I need to buy color swatches so that I can match their machines color range. Seriously? (in farness I was told I would be refunded the cost of the shirt, and they would give me the swathes for free after I said I was closing the account) 20 days since the product was ordered this is the resolution. I have since used the same file and had ordered fufilled buy cafepress with no issues, within 8 days from order date.

I highly suggest to anyone starting out, before you load your store up and work on your seo, test the product.

This is an update to to repsonse I just got and to the e ail as well. I stated in both my review and email the EXACT issue I was having with Printful and what it was doing. And both this response and the email response said, and I qouted ! " We don't see you store on our shop, please make sure it is synced to printful". Ok, I said it once and I'll say it again! You guys are f******** idiots! If I write to you saying that my store WILL NOT sync to printful. And I'll say this again so maybe youll undertsand. " MY STORE WIL NOT! SYNC TO PRINTFUL !!!!!!! Then why WOULD you be able to see it ????!!!! The answer is you wouldn't !! So instead of the response I got, maybe you should include advice of help to FIX the issue instead of the smart ass reply I got. But then again you guys arent to bright. So again! I won't be using printful again. this app is crap. do not recommend and doesn't matter if they respond to this or not, I will never use it again. Complete waste of my time! Fix your site and get it straight before putting online for people to use!