Zakeke ‑ Customizer 2D 3D
- Prijs
-
Vanaf $19.90 per maand. Gratis proefperiode beschikbaar.
- Hoogtepunten
- Populair bij bedrijven in de Verenigde Staten
- Werkt met de nieuwste thema's
- Beoordeling
- 4,4 (104)
- Ontwikkelaar
- Zakeke (Futurenext Srl)
Galerij met uitgelichte afbeeldingen
Voeg live productaanpassing, 3D-configuratie, AR, virtueel passen toe om de verkoop en betrokkenheid te stimuleren
Verbeter uw winkel met meeslepende visuele ervaringen, voeg eindeloze productopties toe met Zakeke Customizer, 3D Product Configurator, 3D DAM & AR Viewer, Virtual Try-On. Onze app stelt uw klanten in staat om unieke aangepaste producten te ontwerpen, ze in 3D & Augmented Reality te zien en ze uit te proberen met onze Virtual Try-On. Stroomlijn de orderverwerking met onze Web to Print automatisering, op maat gemaakte 3D-configuratie, live offertes, dynamische prijsstelling, integratie met uw favoriete print-on-demand (POD) platform
- Tekst- & afbeeldingsaanpassing, verander lettertype, kleuren, afmetingen, oriëntatie & meer
- 3D Product Configurator: klanten kunnen hun eigen versies van uw producten bouwen
- Virtual Try-On: klanten kunnen producten virtueel passen voordat ze deze kopen
- Creëer, bewaar, deel 3D-modellen, vraag offertes aan, embed 3D/AR Viewer in uw winkel
- Simuleer graveereffect op uw product, of het nu glas, hout of staal is
Bevat automatisch vertaalde tekst
- Hoogtepunten
- Populair bij bedrijven in de Verenigde Staten
- Werkt met de nieuwste thema's
Geïntroduceerd
17 november 2017
Talen
Engels, Spaans, Frans, en Duits
Deze app is niet vertaald in het Nederlands
Categorieën
Werkt met
Checkout, Printful, CustomCat, Zapier, Order Desk, Printeers, PageFly Landing Page BuilderPrijs
Starter
$19.90 /maand
of $167.16/jaar en bespaar 30%
1,9% transactiekosten alleen op via Zakeke verkochte producten (Minimum 2 cent)
- Tot 10 gepubliceerde producten
- 2D Visual Customizer
- 3D Configurator
- 3D DAM & AR Viewer
- Virtual Try-On
- "Powered by Zakeke" label
Gratis proefperiode van 14 dagen
Grow
$59.90 /maand
of $503.16/jaar en bespaar 30%
1,8% transactiekosten alleen op via Zakeke verkochte producten (Minimum 2 cent)
- Tot 50 gepubliceerde producten
- 2D Visual Customizer
- 3D Configurator
- 3D DAM & AR Viewer
- Virtual Try-On
- White label
Gratis proefperiode van 14 dagen
Scale
$149.90 /maand
of $1,259.16/jaar en bespaar 30%
1,7% transactiekosten alleen op via Zakeke verkochte producten (Minimum 2 cent)
- Tot 100 gepubliceerde producten
- 2D Visual Customizer
- 3D Configurator
- 3D DAM & AR Viewer
- Virtual Try-On
- White label
Gratis proefperiode van 14 dagen
Starter
$19.90 /maand
of $167.16/jaar en bespaar 30%
1,9% transactiekosten alleen op via Zakeke verkochte producten (Minimum 2 cent)
- Tot 10 gepubliceerde producten
- 2D Visual Customizer
- 3D Configurator
- 3D DAM & AR Viewer
- Virtual Try-On
- "Powered by Zakeke" label
Gratis proefperiode van 14 dagen
Grow
$59.90 /maand
of $503.16/jaar en bespaar 30%
1,8% transactiekosten alleen op via Zakeke verkochte producten (Minimum 2 cent)
- Tot 50 gepubliceerde producten
- 2D Visual Customizer
- 3D Configurator
- 3D DAM & AR Viewer
- Virtual Try-On
- White label
Gratis proefperiode van 14 dagen
Scale
$149.90 /maand
of $1,259.16/jaar en bespaar 30%
1,7% transactiekosten alleen op via Zakeke verkochte producten (Minimum 2 cent)
- Tot 100 gepubliceerde producten
- 2D Visual Customizer
- 3D Configurator
- 3D DAM & AR Viewer
- Virtual Try-On
- White label
Gratis proefperiode van 14 dagen
Bevat automatisch vertaalde tekst
Alle betalingen worden in USD gefactureerd. Terugkerende en op gebruik gebaseerde kosten worden om de 30 dagen gefactureerd. Alle prijsopties
Recensies (104)
App works well.
3 stars because if you use Coreldraw, corel doesn't recognize the font when you import the svg. ( I did ask for help with this and they said it works fine with Illustraor etc..) This then causes a huge issue of figuring out what font was used. You can use Inkscape to figure it out but at that point I can do a layout way quicker.
If they figured out the Corel issue this would be a great app.
So to save my sanity I think I will be deleting it.
Thank you for your review; the honest opinions of our customers help us improve.
Zakeke's ultimate goal is to help print providers automate and scale operations by generating print-ready files that require no further intervention for order fulfillment.
Among the various formats, Zakeke generates an SVG file according to international standards, which all graphic software, including CorelDRAW, can read.
CorelDRAW still reads the SVG file but doesn't identify the font used. The SVG standard includes the font name in quotes (e.g., "Adamina"), but CorelDRAW fails to recognize it, requiring manual font identification. While this is a limitation of CorelDRAW, we understand it impacts your operations. We will soon release a fix to remove the quotes in the SVG for CorelDRAW, ensuring the font is recognized automatically.
excellent app with excellent customer support. easily the best design tool on Shopify
Excellent after sales support. Comprehensive and helpful resolving an issue in our shopify environment.
I think that Zakeke solved most of my issues on offering customers web2print choice instead of print on demand.
It's easy to understeand, user friendly interface, great possibility to customize your product with your personal template and more..
I'm at the beginning but I'm full satisfied.
The app is a development in the right direction. I´d like to have a live chat, the integrations need a bit more work than the current documentation is capable of explaining. It would be cool, to have a page for feature requests.
The front end of Zakeke Customizer needs to undergo a small redesign, hopefully asap. It would be better if we had bigger buttons for the 2 main functions:´upload photo´ and ´add to cart´.
Also a missing key function is to twist the print-area, so that clients who are uploading pics in horizontal format, would be able to twist the print area to horizontal or portrait.
Im excited how the company envolves and if it will become a long term App that i will be using for my shop.
Overall its recommendable, but you have to be technically versile as of now 14.11.2023.
Hello, thank you for your review and detailed feedback, it's highly appreciated.
We'd like to highlight that the twist of the print area is one of the features coming up with the very next update. Also, regarding buttons and other front end details, we are currently working on a new revamped UI, totally customizable to meet these demands and support your growth.
For any other doubt or issue, please contact us at help@zakeke.com, our team will gladly respond to your requests.
Thanks again!
Ondersteuning
Zakeke (Futurenext Srl) kan al je vragen beantwoorden over Zakeke ‑ Customizer 2D 3D.